Original 8 x AA battery holder with 5.5mm/2.1044mm Plug and On/Off Switch – PartsCountry

Description

This is a small development board powered by the ESP32-S3R8 microcontroller. With an Xtensa 32-bit LX7 dual-core processor running at up to 240 MHz, it can handle demanding tasks. It includes 512KB of SRAM, 384KB of ROM, 16MB of Flash memory, and 8MB of PSRAM, providing plenty of storage and processing power for a variety of projects.

It has a 1.46″ LCD display with a sharp and colourful 412 x 412 resolution, 16.7M colours, and a capacitive touch screen. The touch interface is controlled via I2C with an interrupt function, making it ideal for graphical interfaces and interactive designs.

Connectivity options include 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), both supported by a built-in antenna for wireless performance. A USB Type-C port provides power, programming, and debugging.

A 3.7V MX1.25 lithium battery header lets you add a rechargeable battery, and an SD card slot is included for extended storage (battery not included, see note below on the weird MX1.25 connector!).

There are two options for this board: Board only and with a protective glass case. Please choose which one you want before adding it to the cart!

Please note: this board uses a tiny?MX1.25?connector for LiPo power.?Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with?one of our 1.25mm pitch cables?to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely).

Features

• ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Type-C port, more convenient, better device compatibility
• 1.46″ LCD display, 412 x 412 resolution, 16.7M colour
• Touch function controlled via I2C interface, with interrupt support
• QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.
• PCF85063 RTC chip with reserved RTC battery header (supports charging) for RTC function requirement
• Programmable PWM and BOOT buttons for easy custom function development
• 3.7V MX1.25 lithium battery recharge/discharge header
• SD card slot for extended storage and fast data transfer, flexible for data recording and media playback, simplifying circuit design
• Accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
• Multiple GPIO pins which can be mapped to various function interfaces, making it convenient for customers to customize and develop

What’s on Board

1. ESP32-S3R8
   Dual-core processor, up to 240MHz operating frequency
2. QST attitude sensor
   QMI8658C (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)
3. 16MB Flash
4. Speaker
5. Battery recharge manager
6. MP1605GTF-Z
   Power supply module, supports 2A (MAX) output
7. Microphone
8. TCA9554PWR
   GPIO expander chip
9. Amplifier chip
10. PCM5101 audio decoder
11. RTC chip
    PCF85063 RTC chip
12. Multi-Function GPIO header
    Multiple GPIOs available
13. SD card slot
14. IPEX1 connector
    Switching to use an external antenna via resoldering a resistor
15. Onboard ceramic antenna
16. MX1.25 battery header
    MX1.25 2-pin connector, for 3.7V Lithium battery, supports charging and discharging
17. Battery power supply control button
    driver required
18. BOOT button
19. Volume adjustment knob
20. Charge indicator
    The lithium battery charge indicator lights up when charging, and off when fully charged (the light status is uncertain when the battery is not connected)
21. USB Type-C port
22. Power indicator
23. RTC battery header
    For connecting rechargeable?RTC battery

Resources

• Product Wiki
• Schematic

Pinout

Package Contents

Board Only

• 1x ESP32-S3 1.46?? LCD Development Board

With Protective Glass Case

• 1x ESP32-S3 Board with Protective Glass Case