Original 8 x AA battery holder with 5.5mm/2.1082mm Plug and On/Off Switch – PartsCountry

Description

Voltage regulators and transistors can get a little hot sometimes! Most chips state that they can cope with high currents and voltage drops, but running these devices in high-capacity situations can shorten their life.

If you need to protect them from burning out, then add this nifty slide/clip-on** heat sink! No screws of thermal paste required, these heat sinks simply slide** onto any TO-220 size chip.

These heat sinks have a thermal resistance of 28??C/W when connected to a TO-220 chip, which should let you dissipate around 4 Watts of power.

** These heatsinks are slide/Clip-on but you do need to give it a good push, approaching from the side with the angled corner. TO-220 chips are tough, so don’t worry about damaging the casing – it needs a good tight hold!

Specification

• Packages Cooled : TO-220
• Thermal Resistance : 28??C/W
• External Height : 20mm
• External Width : 19.7mm
• External Length : 8.1mm
• Mounting Type : Vertical / Horizontal clip-on