Original Gravity: Digital Capacitive Touch Sensor For Arduino – PartsCountry

Description

The M5StampS3 2.54 is a highly integrated main control core module, using an Espressif ESP32-S3FN8 chip with 8MSPI flash memory, a high-performance Xtensa 32-bit LX7 dual-core processor, and a main frequency of up to 240MHz.

It has a built-in highly integrated 5V to 3.3V circuit, RGB status indicator, and a programmable button. The module breaks out 23 GPIOs on the ESP32-S3, in the form of 2.54mm pins. This module is suitable for IoT application scenarios with embedded main control modules.

We also stock the 1.27mm pin version.?Don’t want pins? Grab the?standard M5Stamp here.

Features

• ESP32-S3FN8 (2.4GHz Wi-Fi)
• Integrated programmable RGB LED and button
• 2.54mm pin headers
• Support UIFlow graphical programming

Specifications

Resources	Parameters
MCU	ESP32-S3FN8
DCDC	Highly integrated MUN3CAD01-SC
Flash	8MB
Input voltage	5V
Interactive	1x Programmable physical buttons, 1x programmable RGB LED (WS2812B-2020)
Antenna type	2.4G 3D antenna
Module resource interface	Touch sensor, SD/SDIO/MMC master controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, GPIO, pulse counter
IO interface x23	G0/G1/G2/G3/G4/G5/G6/G7/G8/G9/G10/G11/G12/G13/G14/G15/G39/ G40/G41/G42/G43/G44/G46
Pin header spacing	2.54mm
lcd interface spacing	0.5mm@12pin or 8pin
Operating temperature	0??C to 40??C
Product Size	26mm x 18mm x 4.6mm
Package Size	136mm x 92mm x 13mm
Product Weight	3.5g
Package Weight	6.3G13:H18g

Resources

• Product Wiki

Package Contents

• 1x M5StampS3?(2.54mm pins)
• 1x Silkscreen stickers