Original 1.69" LCD Display Module (240×280) – PartsCountry

Description

This 1.69″ LCD IPS module is a great way to add a small display to your project.

The display has a 240×280 resolution, and offers 262K RGB colours, to give a clear and vibrant display. The module is controlled via a simple 4-wire SPI interface thanks to the embedded ST7789V2 driver.

The handy mounting holes make it easy to incorporate into a custom panel or 3D printed enclosure, and the online development resources make it easy to get up and running on a Raspberry Pi, Arduino board, and an STM32.

A GH1.25 20cm 8-pin cable is included, ready to connect to your favourite microcontroller.

Connection Example: 1.69inch LCD Display Module connected to the Raspberry Pi

Features

• 240??280 resolution, 262K colours, clear and colourful displaying effect
• SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
• Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications

Operating Voltage	3.3V / 5V
Communication Interface	4-wire SPI
Display Panel	IPS
Driver	ST7789V2
Resolution	240 ?? 280 pixels
Display Size	27.97 ?? 32.63mm
Pixel Size	0.11655 ?? 0.11655mm
Module Size	31.50 ?? 39.00mm

Resources

• Product Wiki

Pinout

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI data input
CLK	SPI clock input
CS	Chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	Reset, low active
BL	Backlight

Package Contents

• 1x 1.69″ LCD Module
• 1x GH1.25 20cm 8-pin cable